Is Your Servicing Technology Working? How to Set Measures Before and After Adoption
Updated November 5, 2026: corrected for accuracy.
A private lender can tell whether a new servicing tool is working by measuring the same tasks before and after adoption. Record a baseline for each function the tool touches, define what success looks like, and set a review window. At the end of the window, decide to keep, reconfigure or retire the tool, then update your SOPs.
Key Takeaways
- Measure before you adopt. Without a baseline, you cannot show change.
- Tie each measure to a function the tool is meant to improve.
- Good measures include posting corrections, data-correction requests after boarding, investor follow-up questions and exception volume.
- Set the review window and the decision rule before the tool goes live.
- End each review with one of three choices: keep, reconfigure or retire.
- Update your SOPs so the decision becomes the normal way of working.
Related Topics
- How to Measure: 10 Ways Tech Is Changing Private Lending
- How to Evaluate: 10 Ways Tech Is Changing Private Lending
- 5 Red Flags in 10 Ways Tech Is Changing Private Lending
- 7 Common Mistakes With 10 Ways Tech Is Changing Private Lending
- 8 Best Practices for 10 Ways Tech Is Changing Private Lending
- 10 Ways Tech Is Changing Private Lending and Mortgage Servicing
Why Do You Need a Baseline Before Adopting a Servicing Tool?
A vendor demo shows what a tool can do. It does not show how your operation performs today. A baseline fills that gap. It is a written record of how each function performs before the new tool goes live.
Without a baseline, every judgment about the tool rests on memory and impressions. Those are hard to compare. A recorded starting point lets you compare like with like.
Build the baseline from records you already keep. Correction logs, ticket queues, shared inboxes and exception reports all work. Use the same source and the same counting rules before and after adoption. If the counting method changes, the comparison breaks. The guide on how to measure technology in private lending covers measurement habits in more depth.
What Should You Measure for Each Servicing Function?
Pick measures that match the job the tool was bought to do. Use a small number of measures per function, and write them down before adoption. Common examples include:
- Payment posting. Track how many posted payments need a correction later. A tool that speeds posting but adds corrections is not working.
- Loan boarding. Track data-correction requests that arrive after a loan is boarded. They show whether boarding captured the terms correctly the first time.
- Investor reporting. Track the follow-up questions investors send after statements go out. Fewer clarifying questions suggest clearer reports.
- Exception handling. Track exception volume, meaning items the tool cannot process and sends to a person. Watch the types of exceptions as well as the count.
Write a short success definition for each measure, such as “fewer posting corrections than in the baseline period.” Avoid targets you cannot trace to your own records.
Some tools touch borrower notices, payment records or other regulated tasks. Whether a specific legal duty applies depends on loan type, state and loan purpose (business or consumer). A speed or volume measure does not tell you whether a regulated task was done correctly. Consult qualified legal counsel about your obligations.
How Long Should the Review Window Be?
Set the window before the tool goes live. If you choose it afterward, you may be tempted to stop the clock when the numbers look good.
The right length depends on your volume and your business cycles. The window should cover enough activity for a fair comparison with the baseline. It should also include busy points such as month-end posting and statement runs. A window that covers only a quiet stretch can make any tool look good.
Expect an early learning dip while staff get used to new screens and steps. Note when training ends, and judge the tool on the period after that. Keep a short log of unusual events during the window, such as a staffing change or a large boarding batch. Those events explain spikes that have nothing to do with the tool.
How Do You Decide Whether to Keep, Reconfigure or Retire the Tool?
At the end of the window, compare each measure with its baseline. Then make one of three choices:
- Keep. The tool met its success definitions and did not push work onto another function.
- Reconfigure. Results are mixed, or the tool works for some loans but not others. Find the cause before you change anything. Training gaps, setup problems and missing data each call for a different fix. Then run a fresh review window against the same baseline.
- Retire. The tool missed its measures after a fair trial, or it created more exceptions than it removed. Plan an orderly exit so records stay complete.
Write down the decision and the reason for it. For questions to raise during that discussion, see how to evaluate technology in private lending. The list of red flags in private lending technology also helps you spot results that need a closer look.
Why Should an SOP Update Be the Final Step?
A decision that never reaches written procedure tends to fade. Staff drift back to old habits, and new hires learn whatever they see. The standard operating procedure (SOP) is where the decision becomes the normal way of working.
Update the SOP for each function the tool touches. Name the tool, the steps, the owner of each step and how exceptions are routed. Record the success measures too, so the next review starts from a known baseline. If you retire a tool, remove it from the SOP and restore or replace the steps it covered.
Plan a recurring re-review, because vendor updates and changes in your loan mix can shift results. The best practices for private lending technology and the common mistakes to avoid can help keep that cycle steady.
Frequently Asked Questions
What is a baseline for a servicing tool?
A baseline is a written record of how a function performs before a new tool goes live. It uses the same sources and counting rules you will use afterward, so the before and after results can be compared fairly.
Which measures work best for judging a servicing tool?
The best measures are tied to the tool’s main job. Examples include posting corrections, data-correction requests after boarding, investor follow-up questions and exception volume. Define success for each one before adoption.
How do I choose a review window?
Match the window to your volume and your calendar. It should cover enough activity for a fair comparison and include busy periods such as month-end. Set it before go-live so it cannot be adjusted to fit the results.
What should I do if results are mixed?
Mixed results usually point to reconfiguring rather than retiring. Find the cause first, whether it is training, setup or data. Make the change, then run a new review window against the same baseline.
Does a good result mean the tool meets legal requirements?
No. Operational measures show efficiency and accuracy, not legal compliance. Requirements depend on loan type, state and loan purpose. Consult qualified legal counsel about your obligations.
Should cost be part of the review?
Cost belongs in the decision, but keep it separate from the operational measures. If you are also weighing third-party servicing as an option, you can request an online price quote.
Sources
- Requirements for servicing records, borrower notices and investor reporting vary by loan type, state and loan purpose. Consult qualified legal counsel about your specific obligations.
Next Steps
If you want to talk through how working with a third-party servicer fits the measures you track for posting, boarding and investor reporting, we are glad to have that conversation. Contact Note Servicing Center to start a conversation about your servicing needs.
Share This Story, Choose Your Platform!
Disclaimer
The information provided in this article is for general educational and informational purposes only and does not constitute legal, financial, investment, tax, or professional advice. Note Servicing Center, Inc. is a licensed loan servicer and does not provide legal counsel, investment recommendations, or financial planning services. Reading this content does not create an attorney-client, fiduciary, or advisory relationship of any kind. Nothing in this article constitutes an offer to sell, a solicitation of an offer to buy, or a recommendation regarding any security, promissory note, mortgage note, fractional interest, or other investment product. Any references to notes, yields, returns, or investment structures are illustrative and educational only. Past performance is not indicative of future results, and all investments involve risk, including the potential loss of principal. Note investing, real estate transactions, and lending activities are subject to federal, state, and local laws that vary by jurisdiction and change over time. Before making any decision based on the information in this article, you should consult with a qualified attorney, licensed financial advisor, certified public accountant, or other appropriate professional who can evaluate your specific circumstances. Some articles on this site include hypothetical stories, examples, and scenarios created to illustrate concepts and demonstrate the types of situations Note Servicing Center, Inc. handles. Any names, companies, properties, and circumstances in these examples are fictitious or have been anonymized to protect confidentiality, and any resemblance to actual persons or entities is coincidental. These examples do not describe specific clients and do not guarantee any particular outcome. Some content may be created with the assistance of generative AI tools and may contain errors or omissions. While we make reasonable efforts to ensure the accuracy of the information presented, Note Servicing Center, Inc. makes no warranties or representations regarding the completeness, accuracy, or current applicability of any content. We disclaim all liability for actions taken or not taken in reliance on this article.
